Categories

There are no subcategories.

Share







Transferring Self-Extracting designs in SHV format to your Designer 1

Transferring Self-Extracting designs in SHV format to your Designer 1:
This is a step by step guide to help you transfer self extracting SHV designs to your embroidery machine (Designer 1).
Please note that this tutorial will be correct only to our specific way of delivering self-extracting SHV files. Other web sites may do it a little differently.
Let's start from the moment you receive an email from us with links to download your embroidery designs (take a look at the picture below). As you may see, there are two links in the email. You should click on both of them one after another and download the two self-extracting files (read downloading instructions,).
Transferring Self-Extracting designs in SHV format to your Designer 1
After these two files are saved on the hard drive of your PC, please take a floppy disk (that doesn't include any important data).
Insert the floppy disk to your computer and format it.

Here is a short formatting instruction:
  • Navigate to "My Computer" and double click on it to see all your PC's drives.
  • Choose drive "A:\" (one left mouse click on the icon of drive "A:\", where your floppy is inserted).
  • Click on the right button of your mouse. When you see a small pop-up menu, please choose the "Format" option.
    Transferring Self-Extracting designs in SHV format to your Designer 1
  • A new pop-up window will open, with different formatting options. Click "Start". You will see another pop-up message, saying:
    "WARNING: Formatting will eraze ALL data in this disk.
    To format the disk, click OK. To quit, click CANCEL".
  • Click "OK". Wait until the formatting process will be successfully completed. Sometimes computers can't finish formatting because the floppy is damaged. In this case, just try to repeat the same ations with a new floppy disk. In case everything went correctly, you should see a message saying "Format Completed". Please close this message.
    Transferring Self-Extracting designs in SHV format to your Designer 1
    Transferring Self-Extracting designs in SHV format to your Designer 1
    Transferring Self-Extracting designs in SHV format to your Designer 1
    When the floppy is formatted properly, please navigate to the location where you have previously saved the downloaded files.
    Double click on the self extracting file ending with "SHV". Now it's the most important moment - the designs should be extracted directly to the clean formatted floppy.
    Transferring Self-Extracting designs in SHV format to your Designer 1
    When the WinZip self-extractor opens, don't change the destination drive (it's by default the correct one, drive A:\). Click "Unzip".
    Transferring Self-Extracting designs in SHV format to your Designer 1
    Transferring Self-Extracting designs in SHV format to your Designer 1
    Wait a couple of minutes until all the designs will be extracted to the floppy. You will prpbably hear some noise coming from drive "A:\" - that's absolutely ok. The most responsible part is finished. Click the "Close" button on the extractor wizard.
    . Transferring Self-Extracting designs in SHV format to your Designer 1
    Now, please repeat the extracting procedure with the second self-extracting file. The only difference is that the second file should be extracted to your hard drive for future reference. It includes color stops information, backup of the designs and other important data.
    Make sure that your embroidery machine is turned on, with the embroidery unit in it. Insert the ready floppy into your Designer 1. Click on the floppy icon on the startup menu. Wait a few seconds. In case the floppy is ok, you will see small icons of the designs you purchased on the touch-up screen. Happy Stitching!
    Transferring Self-Extracting designs in SHV format to your Designer 1

    Subscribe To Email List

    Enter your email address
    below to subscribe to
    Newsletter.